Is it possible to shrink cowboy boots

You can also use the new inserts on top of the stock ones. This method does not alter the shoes at all. Actually, before you try the dunk-in-water technique, use this method.

Sometimes, the boots are not really slouchy. They just need a little boosting of sorts to make them fit snuggier. Get a thick pair of socks, not what you would wear in winter, but the kind of socks that you would wear in summer. Put them on and feel whether the fit of your shoes has changed.

Just make a point of wearing the boots with the thick socks. Problem : Using thick socks might make the boots a bit larger, so in the end, it might never help. You can use heat to stretch shoes and now as it turns out, you can use a hair dryer to shrink boots.

This technique is best used on shoes that have leather on some parts only or on which only a few parts run larger. First, you need a spray bottle. Fill it with water and spray the leather parts or the part of the boot that you want to enlarge. If you do not have a spray bottle, you can use a towel or a sponge to dampen the parts that you want to shrink. After that, take your hair dryer and blow on the wet areas with it from a distance of about 6 inches.

This is going to shrink the boots. It is almost the same as the wet-and-wear method but in this case without submerging the entire boots in water. Assuming that you had cleaned the shoes before shrinking them you should always start with cleaning , you can apply leather conditioner. Tell you what; water is good for boots when they are too large as well as when they are too small. You see, when you need to stretch them, you just need to fill a plastic bag with water, place it in the boots and then keep them overnight in the freezer.

When water turns into ice, it expands! When you expose your boots to extreme heat day after day, it will make the leather brittle in texture and you will feel that your boots are shrinking. We are all aware that certain cloth materials tend to shrink after washing.

Leather too falls in the same line, and if they are not treated with a good conditioner after the washing process, they will get hardened and stiff and as a result you will experience shrinking of the boots.

Actually, it is not the wet texture of the leather that shrinks it, but continuous drying of the boots after getting wet tends to make the leather hard and as a result shrink. If you do not wear your boots for long, the break-in process reverses and then your boots will be back to the stiff form once again and you will feel that they have shrunk.

There is actually no way to just shrink just the shaft of your cowboy boots except taking them to a professional to get it done. Still, you can try the process that is used to shrink the cowboy boots:. You can choose one of the following ways to make your cowboy boots tighter around the calf:. Use warm water to shrink the boots: Fill in a bucket of warm water and immerse your boots in it for an hour.

Do the same with your pair of socks. Now wear the socks and the boots while still wet and let them dry on your feet by sitting in the sun. Your boots will shrink and the calf will become tighter anyway. Wear thick pair of stockings: Wearing thick pair of stockings will make the circumference of your calf area larger and as a result when you wear the boots, the calf area will become tighter.

Adding a belt will make the calf area tighter: You can add a belt around the calf area over the boots and this will help to tighten the area without much effort. Use a hair dryer to shrink the boots: Drying wet boots with the highest heat setting of the hair dryer might help in shrinking the boots. So, if your concerned area is the calf, apply direct heat on the calf area.

You can also carry out the process by inserting wet tissue or a wet cloth inside the suede boots. You can stretch your work boots by following our awesome tricks on how to stretch work boots fast. I have told you earlier as well, before investing in a pair of boots a sufficient amount of research can help you in many ways.

But if you ever face such situations you know how to get out of them, right? Just try these recommended methods and save yourself from throwing your boots in the trash. We all want right protective gear for job! The Work Gearz is dedicated for your safety at workplace. From hard hat to work boots, from tools to safety tips, we have all covered! Use Water to Shrink Boots Our work boots generally use leather as their construction material.

Fill a tub of water and soak your boots in it Fill the tub enough so that your boots can sink in it. Soak a thick pair of socks as well By following this step, your damp socks will help your boots shrink to the proper size and will avoid the pain your feet might feel by shrinking.

Put on the wet boots over your damped socks Try to follow this step as soon as possible because your boots will start to shrink right after you take them out of the tub. Wear them and walk around the house until they are dry After you have followed the above three steps you can do whatever you want. Shrink the Boots with a Hair Dryer The heat method is quite impressive and works perfectly for shrinking the boots. Just come after: 1. Spray the water on outer surfaces of your boots Make your boots soggy by spraying from about 5 inches or 13 cms away to avoid the mess.

When in doubt, check with a local boot repair shop before attempting to stretch or shrink your boots. Additionally, attempting either of these methods will likely render your boots unsuitable for return or warranty repair. How to Shrink Leather Boots If your boots are too large, you'll need to shrink them as much as possible - and, in the process, mold them to the specific shape of your feet. Here's how. Remember, if you purchase a pair of boots online from Langston's in the incorrect size, you can always exchange them for the correct size with our free, no-hassle return policy.